中空玻璃的生产过程中为重要的就是密封环节了，除此之外还有一个同样重要而且在操作系数上来说也是更加困难。中空玻璃的卖点就在于隔音隔热、保温等一系列优良性能，这些性能靠的基本就是中间的充气、之后的密封，这两步骤决定了中空玻璃质量、性能的好坏。今天小编就给大家说说关于自动充气中空玻璃生产线的生产条件与组装要求。
In the production process of insulating glass, the most important part is the sealing link. In addition, there is an equally important and more difficult operation factor. The selling point of insulating glass lies in a series of excellent properties such as sound insulation, heat preservation, etc. these properties rely on the basic air inflation in the middle and the sealing afterwards. These two steps determine the quality and performance of insulating glass. Today, I will tell you about the production conditions and assembly requirements of the automatic inflatable insulating glass production line.
自动充气中空玻璃的原理与充气生产过程控制：
The principle of automatic inflatable insulating glass and the control of inflatable production process:
中空玻璃中间夹层是要充进惰性气体，惰性气体不容易与外界发生反应，所以这才能让中空玻璃具备隔音、隔热等优良性能。在中空玻璃中的惰性气体多用氩气，但是氩气是一种无色无味的气体，且其充气浓度不易测量。那如何测量，充气中空玻璃呢。

Insulating glass interlayer is to be filled with inert gas, inert gas is not easy to react with the outside world, so this can make insulating glass with sound insulation, heat insulation and other excellent performance. Argon is often used as inert gas in insulating glass, but argon is a colorless and odorless gas, and its charging concentration is not easy to measure. Then how to measure, inflatable insulating glass.

充气中空玻璃的生产过程控制概念是，为确保充气中空玻璃生产过程处于受控状态，对影响充气浓度质量的生产过程所采取的作业技术和生产过程的分析、诊断和实时监控。它的作用在于对生产过程的质量控制进行系统安排，对直接或间接影响过程质量的因素进行重 点控制并制定实施控制计划，确保 过程质量。
The production process control concept of inflatable insulating glass is to ensure that the production process of inflatable insulating glass is under control, analyze, diagnose and monitor the operation technology and production process that affect the quality of inflatable concentration. Its function lies in the systematic arrangement of the quality control of the production process, the key control of the factors that directly or indirectly affect the process quality, and the formulation and implementation of the control plan to ensure the process quality.
自动充气中空玻璃的组装要求：
Assembly requirements of automatic inflatable insulating glass:
对环境的要求：温度也应在10-30度之间；2、相对湿度的要求：此种中空玻璃对相对湿度的要求稍低一些，正常情况即可。但应注意的是，干燥剂应选择正规厂家的合格产品，以保证干燥剂的有 效使用。干燥剂开封后很好于二十四小时之内用完，因为聚硫胶的透气性较大，密封性差，因此要采用双道密封。用丁基胶作为一道密封，起到阴隔气体的作用。用聚硫胶作为二道密封，主要作用是粘结作用，其次才是隔气作用。实践证明，单产密封的中空玻璃寿命只有5年左右，而双道密封的中空玻璃寿命可长达20年甚至40年以上
Requirements for the environment: the temperature should also be between 10-30 degrees; 2. Requirements for relative humidity: the requirements for relative humidity of this kind of insulating glass are slightly lower than that of normal situation. But it should be noted that the desiccant should choose the qualified products from regular manufacturers to ensure the effective use of desiccant. The desiccant can be used up within 24 hours after unsealing, because the polysulfide glue has high air permeability and poor sealing performance, so double sealing should be adopted. Butyl rubber is used as a seal to keep the gas away. When polysulfide glue is used as secondary seal, the main function is bonding, and the second is gas isolation. Practice has proved that the service life of insulating glass with single seal is only about 5 years, while the service life of insulating glass with double seal can be as long as 20 years or even more than 40 years